Talk about MakerBot
Questions? Problems? Random ideas? Post here and chat your heart out.
| Thread name | Started | Posts | Recent post |
|
Where is it now? On a mac
|
by: 18 Jun 2011 17:39 |
2 |
by 19 Jun 2011 02:28 Jump! |
|
|
by: 16 Jun 2011 06:01 |
8 |
by 18 Jun 2011 01:37 Jump! |
|
heater failed at print start
|
by: 16 Jun 2011 23:41 |
7 |
by 17 Jun 2011 18:57 Jump! |
|
What is the belt material on the ABP?
|
by: 17 Jun 2011 12:57 |
3 |
by 17 Jun 2011 13:19 Jump! |
|
What temp?
|
by: 16 Jun 2011 17:22 |
5 |
by 16 Jun 2011 21:02 Jump! |
|
|
by: 15 Jun 2011 03:25 |
15 |
by 16 Jun 2011 15:14 Jump! |
|
What machines do I have?
|
by: 14 Jun 2011 17:34 |
9 |
by 16 Jun 2011 00:30 Jump! |
|
What should the resistance measure for a working MK6+ Cartridge Heater?
|
by: 15 Jun 2011 19:28 |
3 |
by 16 Jun 2011 00:00 Jump! |
|
Printing a toddler bike seat. I can get the seat post to fill 100% or the seat frame to fill 100% but not both.
|
by: 15 Jun 2011 20:59 |
1 | |
|
|
by: 15 Jun 2011 05:55 |
3 |
by 15 Jun 2011 10:55 Jump! |
|
Will clipping cables (e.g. SATA power) from the PSU cause trouble down the line?
|
by: 14 Jun 2011 06:39 |
4 |
by 15 Jun 2011 07:19 Jump! |
|
Current temp. on extruder and ABP remains at 0
|
by: 15 Jun 2011 04:22 |
1 | |
|
Cupcake went totally black mid print and now doesn't work.
|
by: 14 Jun 2011 18:57 |
5 |
by 15 Jun 2011 04:02 Jump! |
|
This one part keeps breaking during build.
|
by: 12 Jun 2011 09:31 |
18 |
by 14 Jun 2011 18:12 Jump! |
|
Extruding for 10sec works great, but only once!
|
by: 14 Jun 2011 01:05 |
7 |
by 14 Jun 2011 18:08 Jump! |
|
|
by: 11 Jun 2011 13:40 |
3 |
by 14 Jun 2011 14:32 Jump! |
|
Motor runs, belt doesnt move
|
by: 27 May 2011 13:09 |
22 |
by 13 Jun 2011 17:45 Jump! |
|
The PSU *is* supposed to come with some add'l Y-splitters, correct?
|
by: 11 Jun 2011 18:25 |
10 |
by 13 Jun 2011 17:43 Jump! |
|
|
by: 12 Jun 2011 20:28 |
3 |
by 12 Jun 2011 21:55 Jump! |
|
-0024 worked but -0025 does not
|
by: 12 Jun 2011 18:13 |
5 |
by 12 Jun 2011 19:33 Jump! |
