MakerBot Industries

how to assign tool index above v0029

when i heat up the nozzle the Temperature in ReplicatorG drops slowly to zero

I haven't changed any configuration settings, but suddenly my strand is so thick it's pushing the nozzle. What happened?

Help a newb out

Hi, everybody!!! I don't know, what I'm doing wrong, but my printer creates strange objects. I tried to change the offsets and followed the instructions about the calibration on the net. Can anybody help me?

The TOM stepper motors are out of stock, can someone recommend an alternative?

Printing too "short"

Get a Red fault light the first time I ever powered up my ToM.

Brand new pre-assembled makerbot! I ran a test print yesterday with the files that came on the SD card, worked fine. When I try to upload and print my own s3g files, nothing happens. The nozzle doesn't even move.

MK6 on Makerbot MK4 works like a charm but resolution really lacks

I seem to be having a sizing issue and have not been able to figure it out except by trial and error

Has anybody experience using a Frostruder MK-2 and is willing to share some tipps?

The problems continue......

Curious if wax (parafin) or other materials have been tried yet

Started up my thingomatic yesterday, got everything printing nicely with/without a raft except for one problem. When i print a cube i get a rectangle with the x side twice as long as the y side. Basically The x distance is stretched 2 times the y distance. I looked around a little bit in replicator but nothing jumped out at me. I'm guessing this is probably a silly problem any ideas?

I have tried all of the suggestions posted but still.....